How to Fix NBN Modem Issues

You sit down to start your day, open your browser, and nothing loads. The modem looks fine. The lights are on. But there is no internet. It is one of the most frustrating things that can happen, especially when your business depends on being connected.

The good news is that most NBN modem problems can be resolved without calling a technician. This guide walks through every common cause and fix, from a simple power cycle to diagnosing connection-type-specific issues. Work through the steps in order and you will have a clear picture of what is going on and how to fix it.

First – Is It the Modem, the NBN, or Your Device?

Before touching the modem, spend 60 seconds narrowing down where the problem actually is. This saves time and stops you from resetting things that do not need resetting.

Check another device. If your laptop has no internet but your phone does, the issue is with the laptop, not the modem. Try connecting another device to the same Wi-Fi network. If everything is down, the problem is with the modem or the connection coming into the building.

Check the cable connection. If you are on a wired connection and the internet has dropped, try a different Ethernet cable or port before doing anything else.

Check if it is just one website. If one site will not load but others do, the issue is with that website’s server, not your connection.

Try a different DNS server. Sometimes pages will not load even though you are connected, which can be a DNS issue rather than a real connectivity problem. Trying Google’s DNS (8.8.8.8) in your network settings can rule this out quickly.

Once you have confirmed the problem is genuinely with the modem or NBN connection, work through the steps below.

Network device status guide infographic

Understanding What the Lights on Your NBN Modem Mean

The lights on your modem are telling you something. Knowing what they mean helps you diagnose the issue much faster than guessing.

Light colours and meanings vary by manufacturer and model, but here are the general patterns you will see across most modems.

Power Light

  • Solid green or white – the modem is powered on and running normally
  • Flashing – the modem is starting up or processing
  • Off – no power; check the power cable and power point

Internet or WAN Light

This is the most important one for diagnosing connectivity issues.

  • Solid green or white – connected to the internet
  • Flashing green – data is being transmitted; this is normal during use
  • Solid amber or orange – the modem is connected to the NBN network but cannot reach the internet; usually an ISP authentication issue
  • Red or off – no connection to the NBN; check the cable between your modem and the NBN connection box, or there may be a service outage

Wi-Fi Light

  • Solid – Wi-Fi is enabled and broadcasting
  • Flashing – devices are actively connected and transferring data
  • Off – Wi-Fi is disabled; check the Wi-Fi button on the modem or the admin settings

DSL or Broadband Light (FTTN/FTTC connections)

  • Solid green – the DSL line is synchronised and connected
  • Flashing – attempting to establish a DSL connection
  • Red or off – the DSL line cannot connect; this may indicate a line fault that requires your ISP to investigate

NBN Box Lights (the white box separate from your modem/router)

If you have a separate NBN connection box – which is common on FTTP, FTTC, HFC, and Fixed Wireless connections – it has its own set of indicator lights.

  • Solid green on the UNI-D or optical port – the NBN box is connected and passing signal to your modem correctly
  • Flashing – attempting to establish a connection
  • Amber or red – a fault has been detected; this is usually an NBN Co issue rather than something you can fix yourself

If your NBN box is showing amber or red, check the NBN network status page at nbnco.com.au/support/network-status before doing anything else. There may be a known outage in your area.

Step-by-Step NBN Modem Troubleshooting

Work through these steps in order. Most issues are resolved within the first three.

Step 1 – Power Cycle the Modem and Router

This is the single most effective fix for the majority of modem issues. A power cycle clears the modem’s temporary memory, forces it to re-negotiate the connection with your ISP, and often resolves problems that look far more serious than they are.

How to do it properly:

  1. Turn off your computer or disconnect it from the network
  2. Unplug the power cable from the back of your modem/router at the wall – not just the power button
  3. If you have a separate NBN connection box, unplug that too
  4. Wait at least 60 seconds – not 10, not 30. A full minute gives the capacitors time to discharge and the ISP’s systems time to register the disconnection
  5. Plug the NBN box back in first if you have one, and wait for its lights to stabilise – this can take two to three minutes
  6. Then plug the modem/router back in and wait for it to fully boot – allow up to five minutes
  7. Try connecting again

Do not use the reset pinhole button at this stage. That performs a factory reset, which wipes your settings. A simple power cycle is a restart. The reset button is a last resort covered later in this guide.

Step 2 – Check All Cables

Loose or damaged cables are one of the most common causes of NBN connection problems and one of the easiest to miss.

Check every cable connected to your modem and to the NBN box.

  • Pull each cable out gently and push it back in firmly until you hear or feel it click into place
  • Look for any cables that are visibly kinked, bent sharply, or pinched under furniture – these can break the internal wiring even if the outer sheath looks intact
  • Check the contacts at each end for dust or debris and wipe with a dry cloth if needed
  • Replace any cable that looks damaged

Which cable goes where:

On most NBN setups, an Ethernet cable runs from the yellow port (often labelled UNI-D1 or simply the output port) on the NBN connection box to the WAN, Internet, or NBN port on your modem/router. Check that this cable is seated firmly at both ends and is plugged into the correct ports.

If you are on FTTN or FTTC, your modem connects to a phone wall socket via a DSL cable. Make sure this is plugged into the DSL port on the modem and into the correct wall socket – not the phone port.

Step 3 – Check for an Outage

Before spending more time troubleshooting your own equipment, confirm there is not a known outage in your area. This takes less than two minutes and can save a lot of unnecessary effort.

Check the NBN network status: Go to nbnco.com.au/support/network-status and enter your address. This shows any active outages or scheduled maintenance affecting your connection.

Check your ISP’s status page: Most providers have a service status page or a social media account where they post outage updates. Telstra, Optus, Aussie Broadband, and most other major ISPs provide this. A quick search for your provider’s name and “outage” or “status” will usually find it.

If there is an active outage, there is nothing further you can do except wait for it to be resolved. Contact your ISP to log the issue if you want to be kept informed.

Step 4 – Test With an Ethernet Cable

If you have been testing over Wi-Fi, connect a computer directly to the modem using an Ethernet cable and try again. This isolates the Wi-Fi from the equation.

If the internet works on a wired connection but not over Wi-Fi, the problem is with your wireless network rather than the NBN connection itself. Jump to the Wi-Fi troubleshooting section below.

If neither wired nor wireless is working, the problem is with the modem, the NBN connection, or your ISP account.

Step 5 – Check Your ISP Login Credentials

Your modem authenticates with your ISP using a username and password. If these details have changed, or if the modem’s settings have been reset, the connection will fail even though the physical connection is fine. This is a common cause of the amber internet light – connected to NBN but no internet.

To check:

  1. Open a browser and type your modem’s admin IP address into the address bar – this is usually 192.168.0.1 or 192.168.1.1 (check the sticker on the underside of your modem for the exact address)
  2. Log in using the admin username and password, also usually on the sticker
  3. Find the WAN, Internet, or Broadband settings section
  4. Check that the username and password match what your ISP provided

If you do not have these details, contact your ISP and they can provide them.

Step 6 – Check for Firmware Updates

Modems receive firmware updates from manufacturers that fix bugs, improve stability, and address compatibility issues. An outdated firmware version can cause intermittent drops and connection problems.

Log into the modem’s admin page as described above and look for a Firmware Update or Software Update option, usually under an Advanced or System section. If an update is available, install it and allow the modem to restart.

Step 7 – Factory Reset the Modem (Last Resort)

If none of the above has resolved the issue, a factory reset returns the modem to its original settings. This will erase your Wi-Fi name, password, and any custom settings, so you will need to set it up again from scratch.

How to factory reset:

  1. Find the small reset button on the back or underside of the modem – usually a pinhole requiring a pin or paperclip
  2. With the modem powered on, press and hold the reset button for 10 to 30 seconds until the lights flash or change, indicating the reset has begun
  3. Release the button and wait for the modem to reboot fully – this can take five minutes or more
  4. Once it has restarted, you will need to reconfigure the modem using your ISP’s setup instructions and your login credentials

Before doing a factory reset, take a photo of your current settings through the admin page if you can access it, so you have a reference point when setting it up again.

Modern router setup in cozy space

NBN Connection Type – Specific Issues

The NBN is not one technology. It uses several different connection types, and each has its own quirks worth knowing about.

FTTP (Fibre to the Premises)

With FTTP, fibre runs all the way to the building. Connection issues here are usually either a modem problem or an NBN box problem, since the fibre line itself is very reliable.

If the optical light on your NBN box is off or red, there may be a fault on the fibre line itself. This is an NBN Co issue and cannot be fixed at your end – contact your ISP to log a fault.

Check that the small optical fibre cable running into the NBN box has not been accidentally knocked loose or bent. Fibre cables should never be bent sharply – even a moderate kink can interrupt the signal.

FTTN (Fibre to the Node)

With FTTN, fibre runs to a street cabinet and your premises connect via the existing copper phone line. This is the connection type most prone to speed limitations and line quality issues.

The DSL light on your modem is your key indicator here. If it is not solid, the modem is struggling to synchronise with the node. Common causes include a long copper run from the cabinet, line faults, damaged internal wiring in the building, or interference.

Make sure the DSL cable is plugged directly into the main phone socket rather than through a splitter or extension. Line filters on other phone sockets in the building can also affect DSL signal quality.

If speeds are consistently lower than your plan speed and the line quality has deteriorated, ask your ISP to run a line test. You may also be eligible for an upgrade to FTTP under NBN Co’s ongoing upgrade program.

FTTC (Fibre to the Curb)

FTTC brings fibre to a small distribution point in the street or kerb, with a short copper run into the building. You will have a small NBN connection device (DPU – Distribution Point Unit) somewhere near the main phone socket.

The indicator on this device will show whether the connection to the curb point is healthy. If you see a red or flashing light on the device, it may need to be power cycled or replaced. Contact your ISP if power cycling does not resolve it.

HFC (Hybrid Fibre-Coaxial)

HFC uses the existing cable TV infrastructure for the final connection into the building, via a coaxial cable. Your NBN box connects to a coaxial wall outlet.

Check that the coaxial cable is tightly screwed onto the back of the NBN box and into the wall outlet. These connections can work loose over time. If the cable looks old or damaged, it may need to be replaced.

HFC connections can occasionally be affected by signal levels on the cable network in your area. If your connection was working and has suddenly dropped, check the NBN outage page first.

Fixed Wireless

Fixed Wireless uses a dish or antenna mounted on the exterior of your building to connect to an NBN tower. The antenna feeds into an NBN box inside.

Bad weather, including heavy rain and strong winds, can temporarily affect Fixed Wireless signals. If the connection drops during a storm and comes back afterwards, the antenna alignment may be fine.

If the connection does not return after weather passes, check whether the antenna has moved or been knocked. Even a small shift in alignment can break the signal. This generally requires a technician to realign the dish.

Wi-Fi troubleshooting infographic concepts

Wi-Fi Specific Troubleshooting

If your wired connection works but Wi-Fi does not, the issue is with the wireless side of your setup rather than the NBN connection.

Router placement matters more than most people realise. Wi-Fi signals are blocked and weakened by concrete and brick walls, metal objects, large appliances, and other wireless devices operating on the same frequency. Position the router in a central, elevated location – not inside a cabinet, not on the floor, and not tucked behind the TV.

Check the Wi-Fi frequency band. Most modern routers broadcast on both 2.4GHz and 5GHz. The 5GHz band is faster but shorter in range. The 2.4GHz band reaches further but is slower and more prone to interference from neighbouring networks and household appliances. If a device far from the router is dropping out, check whether it is connecting to the right band.

Too many devices on one network. Every device connected to your Wi-Fi is sharing the available bandwidth. A congested network can feel like an internet problem even when the connection itself is fine. Check how many devices are connected and whether any are running large downloads or backups in the background.

Interference from neighbouring networks. In dense areas with many nearby Wi-Fi networks, channel congestion on the 2.4GHz band is common. Logging into your router’s admin page and changing the Wi-Fi channel manually – typically to channel 1, 6, or 11 for 2.4GHz – can improve performance noticeably.

Wi-Fi dead zones. If certain areas of your building consistently have poor signal, an additional access point or a mesh Wi-Fi system will resolve it far more reliably than repositioning the router. This is particularly relevant for businesses operating across larger or multi-floor premises.

When Your NBN is Slow Rather Than Down

A slow connection is a different problem to no connection at all. If the internet is working but noticeably slower than usual, consider these causes.

Peak-hour congestion. NBN speeds typically dip during the evening when more households and businesses are online simultaneously. If the slowdown happens consistently around 6pm to 10pm and speeds are fine at other times, this is likely the cause. Check whether your plan’s typical evening speed matches what you are actually getting.

Too many devices active at once. All devices on your network share the same bandwidth. Background processes – automatic cloud backups, software updates, streaming on another device – can significantly reduce the speed available for whatever you are trying to do.

The modem or router is overheating. Modems and routers generate heat and need adequate ventilation. A device tucked in an enclosed space or covered by objects can overheat and throttle its own performance. Make sure there is clear airflow around the device.

Your plan may no longer be sufficient. If your team or household has grown, or your use of cloud-based tools has increased, the plan that served you well previously may simply not have enough capacity for current demand. Running a speed test and comparing the result to your plan speed will confirm whether upgrading would help.

When to Call Your ISP vs When to Call an IT Professional

Knowing who to contact saves time and avoids being passed between departments.

Contact your ISP when:

  • There is an outage affecting your area
  • The NBN box lights are showing a fault you cannot resolve
  • Your connection has never worked properly since installation
  • Speed tests are consistently coming in well below your plan speed on a wired connection
  • You suspect a line fault on FTTN or HFC infrastructure

Contact an IT professional when:

  • The ISP has confirmed the connection is fine but devices still cannot get online
  • You need a new modem purchased, configured, and set up properly
  • Your internal network is poorly set up or causing issues
  • You need Wi-Fi coverage extended across a larger space
  • You are setting up a business environment with multiple devices and want it done properly from the start

If you are a business in Griffith or the Riverina and your internet issues are affecting productivity, our IT support team can diagnose and resolve both the physical connection and the internal network setup. We work with businesses across the region on exactly these situations.

Still Not Working? We Can Help.

If you have worked through every step above and still cannot get your NBN connection back up, the problem is likely beyond what a standard troubleshoot can fix. It may be a line fault, a faulty modem, a configuration issue deeper in the network, or an account problem with your ISP that needs to be escalated.

3C Griffith has been supporting businesses and individuals across Griffith and the Riverina with internet and network issues since 1994. We know the local infrastructure, we respond quickly, and we get things sorted properly.

Whether you need someone to come on-site to diagnose the issue, a replacement modem sourced and configured for you, or a full review of your business internet and network setup, we can help.

Call (02) 6962 3100 or contact our team online and we will take it from there.

Explore 3C Griffith’s Services for Local Businesses

While you are here, here is a look at the full range of technology services we provide to businesses across Griffith and the Riverina.

Get in touch today or call (02) 6962 3100. Open Monday to Friday, 8:30am to 5:00pm, at 57-59 Yambil Street, Griffith NSW 2680.

Frequently Asked Questions

Why is my NBN modem light on but there is no internet?

This is one of the most common NBN problems. The modem is powered and connected to the NBN network, but something is stopping it from reaching the internet. The most common causes are a failed ISP authentication – meaning the modem’s login credentials are incorrect or have expired – a service outage with your ISP, or a configuration issue. Start with a power cycle, then check your ISP credentials in the modem admin settings, then check the outage page for your provider.

An amber or orange internet light typically means the modem has a physical connection to the NBN network but cannot authenticate with your ISP to reach the internet. This is usually an account or credentials issue rather than a hardware fault. Log into the modem admin page and verify that the username and password in the WAN settings match what your ISP provided. If they are correct and the issue persists, contact your ISP.

No lights on the NBN box almost always means a power issue. Check that the power cable is firmly plugged into both the box and the power point, and that the power point is working – test it with another device. If the power is fine but the box still shows no lights, the unit may have failed and will need to be replaced by your ISP.

A simple power cycle – unplugging from the wall and plugging back in – does not erase any settings. Only pressing the reset pinhole button performs a factory reset that wipes everything. To preserve your current settings before a factory reset, take screenshots of your modem’s admin pages, particularly the WAN/internet settings, Wi-Fi name and password, and any custom DNS or firewall rules.

Modems typically last four to six years before performance starts to degrade. Signs that replacement may be worth considering include frequent random disconnections that cannot be resolved through troubleshooting, slow speeds on a wired connection even on a higher-tier plan, overheating that resists improvement through better ventilation, or inability to support newer Wi-Fi standards that your devices can use. If you upgraded your NBN plan to one of the 2025 speed tier upgrades and your modem is more than four years old, it may not be capable of delivering the higher speeds.

3C Services

As 3C, we’re excited to continue serving the Griffith community, now with a sharper focus on supporting local businesses.
We’re here to help you navigate the challenges of today’s fast-paced digital landscape with confidence and expertise.

Backed by our 3C Service Guarantee, giving you confidence when you need it.